GB
36 LB 4060
Installation
■
Take long breaks during your
working day so you can re-
cover from the noise and the
vibrations. Plan your work in
such a way that the use of ap-
pliances that generate strong
vibrations is spread over sev-
eral days.
■
If you notice an unpleasant
sensation or discolouration of
the skin on your hands when
using the appliance, stop work
immediately. Take sufficient
work breaks. Without suffi-
cient breaks, a hand/arm vi-
bration syndrome can occur.
■
Minimise your risk of being
exposed to vibrations. Main-
tain the appliance according
to the instructions in the oper-
ating instructions.
■
If the appliance is used fre-
quently, contact your dealer to
purchase anti-vibration ac-
cessories (e.g. handles).
■
Avoid working with the appli-
ance at temperatures below
10°C. Define how the vibra-
tion load can be limited in a
work plan.
4 INSTALLATION
WARNING!
Danger if assembly is
not carried out com-
pletely!
Operation of an incom-
pletely assembled appli-
ance can result in serious
injury.
■
Only operate the appli-
ance when it is fully as-
sembled.
■
Do not insert the battery
into the appliance until it
is fully assembled.
■
Check that all safety
and protective devices
are in place and func-
tioning correctly before
switching on.
4.1 Mounting the blowing tubes (02)
1. Push the upper blowing tube (02/1) onto the
appliance (02/a) until it engages at the lock-
ing button (02/3).
2. Slide the selected lower blowing tube (02/2)
onto the upper blowing tube (02/b).
3. Check the fastened blowing tubes to ensure
they are seated firmly.
To Next Page
Loading...
