To Next Page
A
angela98Aug 6, 2025
Why is my AL-KO Pressure Washer spraying too little water?
- WWesley WrightAug 7, 2025
If your AL-KO Pressure Washer sprays too little water, the appliance might be in Eco mode. Try switching off Eco mode.
Why is my AL-KO Pressure Washer spraying too little water?
If your AL-KO Pressure Washer sprays too little water, the appliance might be in Eco mode. Try switching off Eco mode.
Why is the detergent bottle on my AL-KO Pressure Washer not spraying?
If the detergent bottle on your AL-KO Pressure Washer is not spraying cleaning agent, the detergent bottle attachment may be clogged. Clean the attachment.
How to fix a leaking multi-spray nozzle on AL-KO Pressure Washer?
If the multi-spray nozzle on your AL-KO Pressure Washer is leaking, ensure that the multi-spray nozzle is turned exactly to the desired spray pattern symbol, aligning the spray pattern symbol and selection mark precisely.
Why is my AL-KO Pressure Washer not drawing water?
If your AL-KO Pressure Washer switches on but doesn't draw water or the water pressure is too low, here's what you can check: * Ensure the suction hose is securely connected to the appliance; push it firmly. * Make sure the appliance isn't positioned too high above the water source; hold it lower. * Verify the suction filter is fully immersed in water. * Straighten any kinks in the suction hose. * Clean any clogs from the filter insert and suction filter. * If the water is frozen, warm it up. Avoid using the appliance below 0°C.
Why does my AL-KO Pressure Washer keep stopping?
If your AL-KO Pressure Washer stops automatically, it could be due to a flat battery or clogged components. Try recharging or replacing the battery. Also, clean the multi-spray nozzle, filter insert, and suction filter to remove any blockages.
What to do if water pressure rises suddenly in AL-KO Pressure Washer?
If the water pressure of your AL-KO Pressure Washer suddenly rises, it is likely that the multi-spray nozzle, filter insert, or suction filter is clogged. Clean these parts to resolve the issue.
Why is the water pressure inconsistent on my AL-KO Pressure Washer?
If water is not sprayed with constant pressure from your AL-KO Pressure Washer, the appliance might be drawing in extraneous air. Check the connections of the suction hose and push the suction hose on securely.
General| Max Pressure | 185 bar |
|---|---|
| Weight | 25.8 kg |
| Hose Length | 10 m |
| Engine Type | Electric |
| Soap Tank | Yes |
| Flow Rate | 570 l/h |
| Pump Type | Axial piston pump |
