Why is the engine performance of my AL-KO Snow Line 620E III Snow Blower diminished?
If the engine performance of your AL-KO Snow Blower is diminished, here are a few things to check: Make sure to clean the discharge chute and housing. Also, remove any snow and ice from the auger and impeller. Reducing the operating speed can also help.
What to do if the auger does not turn on my AL-KO Snow Line 620E III Snow Blower?
If the auger on your AL-KO Snow Blower isn't turning when you press the clutch lever, it could be due to a broken shear pin. If that's the case, replace it. Also, try adjusting the control cable.
Why does my AL-KO Snow Blower vibrate excessively?
Excessive vibration in your AL-KO Snow Blower may be caused by issues with the auger and impeller. Check these components for any damage or obstructions.
What to do if the wheel drive doesn't work on my AL-KO Snow Line 620E III?
If the wheel drive on your AL-KO Snow Blower isn't working when the clutch lever is pressed, try adjusting the control cable.
Why does my AL-KO Snow Line 620E III Snow Blower pull to one side?
If your AL-KO Snow Blower pulls to one side, check the tyre pressure and inflate if necessary. Additionally, inspect the skid plates and adjust or replace them as needed.
What to do if the auger drive cannot be stopped on my AL-KO Snow Line 620E III Snow Blower?
If the auger drive on your AL-KO Snow Blower cannot be stopped, switch off the engine and do not attempt repair.
What to do if the wheel drive cannot be stopped on my AL-KO Snow Line 620E III?
If the wheel drive on your AL-KO Snow Blower cannot be stopped, switch off the engine and do not attempt repair!
General| Engine Type | Electric |
|---|---|
| Power | 2000 W |
| Clearing Width | 62 cm |
| Clearing Depth/Intake Height | 30 cm |
| Throwing Distance | Up to 10 m |
| Chassis Material | Plastic |
| Adjustable Discharge Chute | Yes |
Explanation of icons and symbols used in the manual.
Explanation of the clutch levers for engaging/disengaging drives.
Instructions for adjusting the snow discharge chute.
Description of the heated grips feature.
Function of the headlight activation switch.
Control for activating the heated grips.
Location and purpose of spare shear pins.
Lever for controlling the auger's power engagement.
Lever to adjust the height of snow discharge.
Control for selecting forward and reverse speeds.
Lever for controlling the wheel drive engagement.
Component for setting the blowing height.
Component for directing snow, includes protective guard.
Illumination feature for visibility.
Mechanism for adjusting snow discharge direction.
The power unit of the snow blower.
Protective cover or guard.
Tool used for clearing blockages.
Connection point for the spark plug, used for safety.
Rotating part that collects snow.
Component that expels snow from the chute.
Parts that set the clearing plate height.
Front part of the snow blower that contacts snow.
Icons indicating general cautions and special care.
Symbols related to specific safety instructions and warnings.
Advice on protective gear and safe operating practices.
Alerts regarding potential injuries, fire hazards, and poisoning.
User duties, limitations, and prohibited actions.
Guidelines for working safely in various conditions.
Warnings about specific dangers like slipping or entanglement.
Important safety notes before and during assembly.
List of tools needed for the assembly process.
Outline of the sequence for assembling the machine.
Procedure for attaching the control panel.
Steps for connecting and adjusting control cables.
Instructions for fitting the speed and height levers.
Procedure for wiring the heating and headlight.
Steps for mounting the snow discharge chute.
How to fasten the control cable to the discharge flap.
Recommended types and quantities of fuel and oil.
Essential safety measures during fueling and oiling.
Visual inspection and tyre pressure verification.
Procedure for setting the clearing plate height safely.
Precautions against running the engine in enclosed spaces.
Explanation of control panel indicators.
Methods for starting the engine manually or electrically.
Warning about engine coasting after shutdown.
Safety advice for operating the machine.
Sequence for starting and operating the snow blower.
Detailed steps for removing snow and ice blockages.
Safety rules and cleaning instructions.
Recommended maintenance tasks and intervals.
Procedure for lubricating the auger assembly.
Steps to adjust the wheel drive control cable.
Steps to adjust the auger drive control cable.
Purpose of shear pins and safety before replacement.
Steps for removing and installing shear pins.
Safety measures for storing the machine.
Steps to prepare the machine for storage.
When and how to get professional assistance.
Advice on recycling and proper disposal methods.
Solutions for problems with starting, performance, and operation.
Explanation of warranty coverage, limitations, and claims.
Summary of product, manufacturer, and standards compliance.
To Next Page
