STEP 5
Attach the 1/2” conduit connector on ceiling box to bottom of conduit assembly. Once completely inserted,
tighten set screw on conduit connector. See Diagram B. https://youtu.be/JghN8ECvTz4
Never attach or adjust the conduit assembly improperly. is could interfere with the automatic shuto
system and could cause the chandelier to fall, which could cause death, personal injury, and/or property
damage.
1/2” Conduit Connector
STEP 6
Tighten temporary ve pound weight to xture coupler on bottom contact plate. Make sure jam nut on
weight is tight.
Never install or operate an ALL200 before securing the temporary ve pound weight to the xture
coupler. is could cause the temporary weight to fall, which could cause death, personal injury, and/or
property damage.
Diagram B
To Next Page
Loading...