Alamo Industrial Exten-A-Kut II User Manual (English)

Questions and Answers:

C
Christopher NelsonJul 30, 2025
What to do if my Alamo Industrial Exten-A-Kut II Lawn Mower is not cutting grass properly?
- A
  Andrew RobertsJul 30, 2025
  If your Alamo Industrial Lawn Mower is not cutting, the blades may be dull. Try sharpening or replacing the blades. Also, ensure the carrier RPM is correct by using the proper PTO speed and checking the blade tip. Make sure the cutter is level, adjust if needed. Reduce ground speed by shifting to a lower gear and free the blades, if they are locked back. Finally, replace the blade bolts if the blades are riding up due to blade bolt wear or loose bolts.
C
Connie WoodAug 8, 2025
How to reduce excessive vibration in my Alamo Industrial Exten-A-Kut II Lawn Mower?
- J
  jsmithAug 8, 2025
  If you're experiencing excessive vibration with your Alamo Industrial Lawn Mower, start by checking for loose nuts on the blade holder and blades and tighten them if necessary. Ensure the blades swing freely. Inspect each blade tip for even wear, and if uneven, consider if both blades were changed simultaneously. Replace broken blades in sets. If the blade carrier is bent, replace it. Ensure the blade hub is properly seated on the shaft by removing the hub, checking the tapered spline shaft, cleaning, and replacing it. Finally, replace blades or bolts in sets if new ones are mixed with worn ones.
M
Melissa RamirezAug 19, 2025
What to do if my Alamo Industrial Exten-A-Kut II is leaving streaks?