To Next Page
J
Joseph PadillaJul 30, 2025
What to do if the Alamo Industrial Lawn Mower hydraulic cylinder is not working?
- MMichelle TaylorJul 30, 2025
If your Alamo Industrial Lawn Mower's hydraulic cylinder isn't working, start by checking the hydraulic fluid level using the sight gauge on the tank. Next, verify the pump's functionality by testing another cylinder or a pressure gauge. If the pump is okay, check the line pressure, as the relief valve might be bypassing fluid at pressures that are too low. If the cylinder still isn't working, inspect the line for any blockages. If these steps don't solve the issue, the cylinder might need replacement due to a scored wall allowing oil bypass around the piston.
General
