Alamo Industrial Traxx RF User Manual

©2014 Alamo Group Inc.
$0.00
Published 04/14 Part No. TR477144
OPERATOR’S MANUAL
ALAMO INDUSTRIAL
®
1502 E. Walnut
Seguin, Texas 78155
830-372-3551
Email: parts@alamo-industrial.com
REMOTE CONTROLLED MOWER
This Operator's Manual is an
integral part of the safe operation of
this machine and must be
maintained with the unit at all times.
READ,
UNDERSTAND, and
FOLLOW the Safety and Operation
Instructions contained in this
manual before operating the
equipment. C01-Cover_A
Important Operating
and Safety Instructions
are found in the Mower
Safety Video that can
be instantly accessed
on the internet at:
www.algqr.com/ave

Alamo Industrial Traxx RF Specifications

General

Manufacturer	Alamo Industrial
Model	Traxx RF
Cutting Width	72 inches
Fuel Type	Diesel
Transmission	Hydrostatic
Drive System	4WD

Summary

Introduction

MACHINE DELIVERY

Machine delivered ready for use; remove packaging and loosen transport fasteners.

LIMITED WARRANTIES

Alamo Industrial warrants goods purchased to be free from defects in material or workmanship.

ASSEMBLY

GENERAL INSTRUCTIONS

TRAXX RF is assembled and ready for use. Remove packaging and loosen fasteners.

Instructions to Uncrate Your TRAXX™RF

Details on removing remote control, batteries, charger, and machine from crate.

OPTIONAL HITCH

Installation procedure for the optional hitch attachment.

SAFETY

GENERAL SAFETY INSTRUCTIONS AND PRACTICES

Awareness of hazards and precautions for safe operation.

OPERATOR SAFETY

Guidelines for operator protection, including PPE and safe practices.

CRUSHING HAZARDS

Risks from equipment falling, run over, and crushing injuries.

THROWN OBJECTS HAZARDS

Hazards from objects thrown by mower; protective measures.

HAZARDS WITH MAINTENANCE OF IMPLEMENT

Safety precautions for performing service, repairs, and maintenance.

Federal Laws and Regulations

Overview of OSHA and employer/employee safety responsibilities.

OPERATION

ALAMO INDUSTRIAL TRAXX RF OPERATING INSTRUCTIONS

Safe and effective operation guidelines for the remote control mower.

1. Standard Equipment and Specifications

Machine features, power unit, remote control, and hydraulic system details.

2. OPERATOR REQUIREMENTS

Qualifications and Personal Protective Equipment (PPE) for safe operation.

3. STARTING THE ENGINE

Procedure for safely starting the diesel engine.

9. Driving and Maneuvering the Machine

Instructions for operating the machine's movement controls.

10. OPERATING THE TRACTOR AND IMPLEMENT

Safe operation procedures when using tractor and mower together.

13. TROUBLE SHOOTING GUIDE

Common problems and their solutions for the machine.

MAINTENANCE

HAZARDS WITH MAINTENANCE OF IMPLEMENT

Safety precautions before performing service and repairs.

Diesel Engine

Service and maintenance information for the diesel engine.

Maintenance Schedule (Track)

Recommended track inspection and maintenance intervals.

Maintenance Schedule (Hydraulic Oil)

Hydraulic oil maintenance schedule and procedures.

CHANGING ENGINE OIL AND FILTER

Procedure for changing engine oil and filter.

BLADE INSPECTION AND REPLACEMENT

Guidelines for inspecting and replacing mower blades.

FUSES AND RELAYS

Information on accessing and understanding the fuse panel.

Proper Torque for Fasteners

Chart for correct tightening torque values for fasteners.