Need help?Do you have a question about the Alarko OPTIMA and is the answer not in the manual?
Covers general cautions, hazards, and safety symbols for pump operation.
Details pump construction, main components, and materials.
Specifies intended applications and criteria for pumped liquids.
Outlines acceptable voltage, temperature, pressure, and ambient limits.
Lists package items and highlights insulation shells.
Guidelines for safely lifting, transporting, and storing the pump.
Explains information presented on the pump's nameplate.
Presents detailed technical specifications for pump performance.
Details correct and incorrect orientations for pump installation.
Describes requirements for installing multiple pumps.
Covers pipe connection, valve closure, pump mounting, gaskets, and fixing.
Explains procedures for filling the system and venting air.
Details cable selection, fuse values, and electrical connection requirements.
Describes the control panel, display, LEDs, and buttons.
Introduces manual, constant pressure, and variable pressure operating modes.
Covers accessing service information on the pump display.
Explains how to change the pump's language.
Guides the user through initial start-up, system checks, and power-on.
Details continuous operation and safe shutdown procedures.
Illustrates operating modes and their impact on head and flow.
Explains function and settings for primary operating modes.
Provides guidance on choosing modes based on system type and characteristics.
Outlines warranty terms and customer service contact information.
Details error codes, their causes, and warnings.
Provides a fault flowchart and troubleshooting steps for pump malfunctions.
Details safety precautions and steps for safely dismantling the pump.
Advises on proper disposal methods for the pump and its parts.
Lists the physical dimensions for various Optima pump models.
Shows general pump selection curves for different models.
Displays performance curves for Variable Pressure Operating Mode.
Displays performance curves for Constant Pressure Operating Mode.
Displays performance curves for Manual Operating Mode.
Contains the manufacturer's declaration of product conformity to directives.
General| Maximum Operating Pressure | 10 bar |
|---|---|
| Insulation Class | F |
| Frequency | 50 Hz |
| Type | Centrifugal |
| Phase | Single |
| Voltage | 220-240 V |
To Next Page