Alarm.Com ADC-NK-200T-A User Manual

1
Alarm.com Hub
ADC-NK-200T-A
With the Alarm.com Hub as your home’s command center, you’ll gain remote control of your key
devices using our reliable and secure cloud service. Create automated lighting, thermostat, and
video recording rules, and get customized alerts to always know what’s going on at home.
Box Contents:
• Alarm.com Hub
• Power Cable/AC Adapter
• Ethernet Cable
• Wall Mount Bracket
• Wall Mount Screw
• Product Manual
What You Need:
If you don’t already have a customer account with us, visit www.Alarm.com, and click on “Find a
Service Provider Near You” under “Get Started” to find an authorized Alarm.com dealer near
you.
Works With:

Alarm.Com ADC-NK-200T-A Specifications

General

Input	120VAC, 60 Hz
Power Supply	120VAC, 60 Hz
Color	White
Operating Temperature	32°F to 104°F (0°C to 40°C)
Operating Humidity	85% relative humidity maximum
Wireless Frequency	908.4 MHz or 916 MHz
Maximum Load	1/2 HP motor
Load Rating	1/2 HP Motor
Wireless Protocol	Z-Wave

Summary

Installation Steps

Install the Hub

Plug the AC adapter into an unswitched outlet and connect to the Hub's DC IN port. Wait for the status light to turn solid white.

Add Z-Wave Devices

Add Z-Wave devices by navigating the Hub's menu, entering Add Mode, and following device instructions for pairing.

Complete Installation

Place the Hub in its permanent location, connect power, and continue account setup via MobileTech or Partner Portal.

Troubleshooting Guide

Remove Z-Wave Devices

Remove Z-Wave devices by navigating the Hub's menu, entering Remove Mode, and following device instructions for exclusion.

Indicator Light Status

Compliance and Regulatory Information

FCC Compliance

Details FCC rules for device operation, including conditions for non-interference and acceptance of received interference.

ISED Compliance

Provides Innovation, Science and Economic Development Canada (ISED) compliance statements and operating conditions.