For a detailed list of this video device's features, see Stream Video Recorder (ADC-SVR100) - Data Sheet.
To install the SVR:
1. Use a standard Ethernet cable to connect the SVR to the router.
Important: The SVR must be connected to the same router as the cameras to be associated with it.
2. Connect the SVR to the AC adapter and plug it into an electrical outlet.
3. Allow a few minutes for the SVR and router to connect. When the PWR LED is solid green, the wireless
connection is complete.
4. Add the device to the account by selecting the account in the MobileTech app, by using the Customer app Video
Installation Wizard, or by using a web browser and entering the following web address: www.alarm.com/
addcamera (you will need the customer’s user name and password if using the Customer Website). For more
https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Video_Devices/Stream_Video_Recorder_(SVR)/Str…
Updated: Thu, 29 Apr 2021 21:14:33 GMT
2
To Next Page
Loading...
Need help?
General