Alarm Lock LEVER SPRING REPLACEMENT KIT Addendum User Manual

ADDENDUM
LEVER SPRING REPLACEMENT KIT
WI1368B 2/06
345 Bayview Avenue
Amityville, New York 11701
For Sales and Repairs 1-800-ALA-LOCK
For Technical Service 1-800-645-9440
Publicly traded on NASDAQ Symbol: NSSC
© ALARM LOCK 2006
HOW TO REPLACE THE LEVER SPRING (PART HW1220)
2. Remove the broken Lever Han-
dle Spring (HW1220).
1. With outside housing removed
from door, unscrew two screws
and remove the Spring Cover Plate
(HW565) as shown.
3. Remove Connector Plate (HW570).
5. If Lever Connector has a gold finish,
insert Plastic Ring (HW573). If
Lever Connector has a silver
finish, DO NOT insert Plastic
Ring.
4. Remove Lever Connector (HW572).
Make note of the Lever Connector
finish--either gold or silver.
8. Replace the Spring Cover Plate
(HW565) and secure with two screws.
APPLICABLE MODELS
DL2700
DL3000
PDL3000
DL4100
PDL4100
DL2800
Spring Cover Plate (HW565)
Screws (2)
Connector
Plate (HW570)
Lever Connector
(HW572)
Outside Housing
Lever Handle Spring
(HW1220)
Plastic Ring
(HW573)
Spring Cover
Plate
Lever Connector
6. Replace Lever Connector (HW572)
and Connector Plate (HW570).
7. Install new Lever Handle Spring
(HW1220) in place of broken spring.
Connector Plate
Plastic Ring
(HW573)
Connector Plate
(HW570)
Lever Connector
(HW572)
Lever Handle Spring
(HW1220)

Alarm Lock LEVER SPRING REPLACEMENT KIT Addendum Specifications

General

Category	Locks
Type	Lever Spring Replacement Kit
Compatibility	Alarm Lock lever locks
Package Contents	Springs
Usage	Replacement of worn or broken lever springs in Alarm Lock lever locks