Alarm Lock Trilogy DL1200

To Next Page

CONGRATULATIONS!

Your new DL1200 Alarm Lock Trilogy electronic digital lock is a manually

programmable narrow stile entry trim for Adams Rite

4710, 4730 and

4900 deadlatch locks, and 1850, 1950, 4070, MS1850S and MS1950S

series deadbolts for narrow stile aluminum doors*. The DL1200 is a rug-

ged entry lock of advanced design with several programmable features.

Three security levels are provided: Master (can perform ALL functions),

Manager (can perform MOST functions plus entry), and Basic User

(entry only).

The lock includes 100 User Codes (consisting of Managers and Basic

Users), plus three "one-time entry" Service Codes.

The Manager/Basic User Codes are organized

similar to a grid--ten banks of ten Access Codes.

Take the time to read through this guide to familiar-

ize yourself with the features and operations of the

lock, and its quick and easy programming proce-

dures.

Features

• 1 Master Code (all functions including entry)

• 10 Manager Codes (perform SOME programming

functions plus entry)

• 90 Basic User Access Codes (Entry Only)

• 3 Service Codes ("One-Time Entry" Codes)

• Two User Disable Modes:

• All User Codes Disabled Except Master Code

• All User Codes in a Bank Disabled Except

Manager Codes

• 30-Second Keypad Anti-Tamper Lockout:

(Keypad Lockout After 3 Unsuccessful User Code

Entries)

Trilogy

DL1200

Programming Instructions

OI310 11/05

345 Bayview Avenue

Amityville, New York 11701

For Sales and Repairs 1-800-ALA-LOCK

For Technical Service 1-800-645-9440

QUICK LOOKUP

Wiring .................................................................2

Quick Start ........................................................2

Testing Codes ....................................................3

Manager & User Location Worksheet ................4

Manager & User Location Example ..................5

Programming Worksheet: Functions ..................6

Change Existing Master Code .......................7

Add/Change Manager Codes ........................7

Add/Change User Codes ..............................7

Deleting Codes ..............................................7

Disable/Enable Users ....................................7

Disable/Enable All .........................................8

Code Location Function ................................8

Next Free Code Address Locator ..................8

Add/Delete Service Codes ...........................9

Enable/Disable Passage Mode .....................9

Pass Time ("Door Unlock") ............................9

Disable/Enable Groups .................................9

Disable/Enable Users in Bank .....................10

Keypress Sound Options .............................10

Audible and LED Indications ............................10

Battery Replacement ........................................11

Erase All Programming ....................................11

Limited Warranty ..............................................12

DL1200

*Adams Rite Manufacturing Co., Pomona, CA. www.adamsrite.com

All products, product names and services described in this manual are for identification

purposes only and may be trademarks of their respective companies.

Need help?

Do you have a question about the Alarm Lock Trilogy DL1200 and is the answer not in the manual?

Summary

Trilogy DL1200 Programming Instructions

Key Features Overview

Summarizes lock capabilities, security levels, and user types.

Quick Lookup Guide

Index of functions with corresponding page numbers for quick reference.

Quick Start

First Time Setup Procedure

Initial steps for lock preparation after unpacking.

Setting Your Master Code

Essential process to change the factory default Master Code for security.

Quick Start (contd)

Enter Manager Access Codes

Instructions for adding Manager credentials.

Enter Basic User Access Codes

Steps for assigning entry-only user credentials.

Delete User Access Codes

Procedure for removing existing user codes.

Testing Lock Codes

How to verify valid and invalid code entries.

Manager & User Location Worksheet

Location Worksheet Template

A grid for mapping code assignments and locations.

Manager & User Location Example

Manager Bank Control Example

Illustration of manager's access scope over user banks.

Programming Worksheet: Functions

Change Master Code Procedure

Steps to update the primary security code.

Manage Manager and User Codes

Instructions for adding and changing access credentials.

Service Code Management

How to add and manage one-time entry codes.

Erase All Programming

Procedure to reset the lock to factory default settings.

Programming Functions

Code Management Operations

Covers master, manager, and user code modifications.

User Status Control

Functions to disable/enable individual user access.

Programming Functions (contd)

Global User Status Control

Operations to enable/disable all users or specific types.

Code Location Tools

Utilities to find codes and available programming slots.

Programming Functions (contd)

Service Code Operations

Adding, deleting, and managing service codes.

Passage Mode and Time Settings

Controls for passage mode and door unlock duration.

Group Access Control

Settings for manager access scope across user banks.

Programming Functions (contd)

Bank-Level User Management

Disabling/enabling users within specific banks.

Keypad Feedback Customization

Options for keypad sound and LED feedback.

Lock Feedback Indications

Summary of lock's audible and LED signals.

Battery Replacement

Retain Programming During Battery Change

Steps to preserve settings during battery swap.

Erase All Programming

Alternative Reset Procedure

Method to reset without the current Master Code.

Alarm Lock Limited Warranty

Warranty Terms and Conditions

Details of coverage, exclusions, and limitations.