Alarm Lock Trilogy DL5200

To Next Page

CONGRATULATIONS!

Your new Alarm Lock Trilogy electronic digital lock is a rugged

double-sided entry lock of advanced design with several program-

mable features. Three security levels are provided: Master (can

perform ALL functions), Manager (can perform MOST functions

plus entry), and Basic User (entry only).

The lock includes 100 User Codes (consisting of Managers and

Basic Users), plus three "one-time entry" Service Codes. The

Manager/Basic User Codes are organized similar to a grid--ten

banks of ten Access Codes.

Take the time to read through this guide to familiarize

yourself with the features and operations of the lock, and

its quick and easy programming procedures.

FEATURES

• 1 Master Code (all functions including entry)

• 10 Manager Codes (perform SOME programming

functions plus entry)

• 90 Basic User Access Codes (Entry Only)

• 3 Service Codes ("One-Time Entry" Codes)

• Two User Disable Modes:

• All User Codes Disabled Except Master Code

• All User Codes in a Bank Disabled Except Manager

Codes

• 30-Second Keypad Anti-Tamper Lockout

(Keypad Lockout After 3 Unsuccessful User Code

Entries)

• Programmable Relay Functions

(Relay may be keypad programmed to energize on any

keypress 0-9 or on unlock).

• Locks may be pre-programmed prior to installation.

Once installed, locks may immediately be put into use.

• Clearing all user codes only requires a simple two step

procedure (see "Erase All Programming" on page 11).

Trilogy

DL5200 Programming

Instructions

OI345 10/08

345 Bayview Avenue

Amityville, New York 11701

For Sales and Repairs 1-800-ALA-LOCK

For Technical Service 1-800-645-9440

QUICK LOOKUP

Wiring ............................................................... 2

Quick Start ...................................................... 2

Testing Codes .................................................. 3

Manager & User Location Worksheet .............. 4

Manager & User Location Example ................ 5

Programming Worksheet: Functions ............... 6

Change Existing Master Code ...................... 7

Add/Change Manager Codes ....................... 7

Add/Change User Codes ............................. 7

Deleting Codes ............................................. 7

Disable/Enable Users ................................... 7

Disable/Enable All ........................................ 8

Code Location Function ............................... 8

Next Free Code Address Locator ................. 8

Add/Delete Service Codes .......................... 9

Enable/Disable Passage Mode .................... 9

Pass Time ("Door Unlock") ........................... 9

Disable/Enable Groups ................................ 9

Disable/Enable Users in Bank .................... 10

Keypress Sound Options ............................ 10

Audible and LED Indications .......................... 11

Battery Replacement ..................................... 11

Erase All Programming .................................. 11

Limited Warranty ............................................ 12

DL5200

PRIMARY SIDE

DL5200

SECONDARY SIDE

Other manuals for Alarm Lock Trilogy DL5200

Installation Instructions8 pages

Need help?

Do you have a question about the Alarm Lock Trilogy DL5200 and is the answer not in the manual?

Summary

Quick Start

First Time Start Up

Guides the initial setup process, including unpacking, battery connection, and initial programming sequence.

Change Factory Master Code

Details the critical procedure for changing the default Master Code to a personal, secure code for system administration.

Enter a Manager Code

Provides instructions on how to add or change Manager Codes, specifying location and digit requirements.

Enter Basic User Access Codes

Explains the process for adding Basic User Access Codes, including location selection and digit requirements.

Delete a User Access Code

Testing Codes

Manager & User Location Worksheet

Programming Functions

Change Existing Master Code

Outlines the procedure to modify the Master Code using keypad sequences, requiring old and new codes.

Add;Change Manager Codes

Details how to add or modify Manager Codes, specifying the Master Code, location, and new code.

Add;Change User Codes

Deleting Manager & User Codes

Disable;Enable Users

Enable;Disable All

Code Location Function

Battery Replacement

Erase All Programming