Need help?Do you have a question about the Alarm Lock PG-10 and is the answer not in the manual?
Instructions for installing an outside cylinder through the door for the PG-10 unit.
Guidance on installing the threaded mortise cylinder into the PG-10 cover.
Steps to test the unit's functionality using the test button and slide switch.
Procedure to test the alarm response when the door is opened and closed.
Recommendation for weekly testing to ensure battery operational status.
Guidance on using a non-magnetic shim for steel frames to prevent false alarms.
General| Latchbolt | 1/2" Throw |
|---|---|
| Auto Lock | Yes |
| Backset | 2-3/4" |
| Finishes | Satin Chrome |
| Keypad | 12-button |
| Finish | Satin Chrome |
To Next Page
