PG21MSS Door Alarm
sight + sound = Pinpoint Security
Alarm Lock’s PG21 Series Narrow Stile Door Alarms have long been an industry
staple in all applications, from retail, to firms, to institutions and schools. And
now the best, just got better! The New & Improved PG21 MS Series Door Alarms
have new features and a new Designer Look that fits both standard size and
narrow stile doors. The new Strobe Option for sight and sound upon alarm is a
necessity when time is so critical in apprehending a perpetrator making an un-
authorized exit. Now security staff can audibly and visually pinpoint which door,
across the floor, even among a whole bank of doors, has been violated faster
than ever.
ADVANCED NEW FEATURES:
• New designer look
• Always Armed Mode
• Standard Arming Mode
• Status Indicator - RED when armed
• Entry Delay Time Options - 15 sec., 1 min. 15 sec., 3 min. 15 sec.
• Self-contained and dual-tamper supervised
• Convenient No-Cut jumpers
• Improved sweeping siren over 95db
• Visual magnetic alignment mode, eliminates templates
• Long-life 9V battery powered (supplied); Low battery alert
• Non-strobe version also available with new and improved features
• CER rim cylinder for exterior arming/disarming
AppliCATioN:
The PG21MS is a magnetic contact controlled door alarm for surface mounting on
a door or door frame. Typical applications include emergency fire escape doors,
nursing home stairwell doors, rear restaurant and theater doors. PG21MS is de-
signed to continually monitor the status of a door. When opened, the protected
door triggers an alarm sounder, an optional strobe or can activate another device
via a Form-C relay.
iNSTAllATioN:
The PG21MS unit is usually mounted on the interior of the door frame or door and
is paired with a magnet mounted on the opposing side of the door gap. Open-
ing the door, when armed, will trip the internal relay thus activating the alarm.
Shipped in Always Armed mode can be converted to a manual On/Off mode (al-
lowing the operator to manually arm or disarm with the key). The Status indicator
(located on the front of the Housing Cover) signifies whether the unit is armed or
disarmed (red indicates armed status). A selectable annunciator feature beeps to
signal the opening of the door while the unit is disarmed.
To Next Page
Need help?
General
