6
Assembling
Opening
1. Use the notch to remove the back cover.
Do not bend or twist the back cover excessively, doing so may damage
the cover.
2. Remove the battery.
Inserting a SIM card
Insert your 3G SIM card (with gold contacts facing down) into slot 1.
If you insert it into slot 2, 3G will not work. Slot 2 is for 2G only.
Inserting a Memory card
Insert your memory card (with gold contacts facing down) into the
micro SD slot(3).
Closing
1. Align the battery’s 4 contact points with those of the phone and
gently press the battery down into place.
2. Replace the back cover clicking it back into position.
Tip:
Before using your device for the first time, charge its battery
completely.
Alba_4_Android_book.indd 6 12/05/2015 17:56:35
To Next Page
Loading...
