Need help?Do you have a question about the Albrecht Tectalk Easy 2 and is the answer not in the manual?
General| Maximum range | - m |
|---|---|
| Call rings quantity | 10 |
| Battery type | AAA |
| Battery low indication | Yes |
| Number of batteries supported | 3 |
| Product color | Black, Red |
Weight and Dimensions| Weight | 63 g |
|---|---|
| Dimensions (WxDxH) | 45 x 35 x 115 mm |
Specific advice for safe operation, including medical devices, explosive environments, and aircraft use.
Instructions for powering the device on and off using the power button, confirmed by a beep.
How to increase or decrease the volume using the up and down buttons, with volume level shown on screen.
How the battery level is displayed on the LCD screen and what low battery indicators mean.
Describes the receive mode and the RX icon displayed on the LCD when a signal is received.
Guidance on transmitting, including pressing PTT, microphone positioning, and TX indicator.
How to change between the 8 available communication channels using buttons.
How to use the monitor feature to check for weak signals by holding the volume down button.
Explains automatic channel scanning, how to start, change direction, and abort.
Introduces call tones to alert others, with instructions on setting them.
Steps to set the call tone by pressing Menu twice and using up/down buttons.
How to transmit a call tone by briefly pressing the PTT/Call button.
How to enable or disable the keypress beep sound using the Menu button.
How to enable or disable the roger beep confirmation sound after stopping transmission.
How to activate the LCD display backlight using the up or down keys.
Explains the automatic economy mode activation when the device is not used.
How to activate the built-in flashlight by pressing the Lamp button.
To Next Page
