What to do if the ALC Touchscreen shows no image?
If your ALC Touchscreen shows no image, ensure the screen lock is off by tapping the Power button. Also, verify that the camera’s power is on and that the monitor has sufficient charge or is connected to the adapter. If the issue persists, try moving the camera closer to the monitor or adjust the antenna for better reception.
Why is my ALC Touchscreen not working?
If the ALC Touchscreen is not working, it might be in Lock mode; press the Power button once to unlock it. Alternatively, it could be in Start (Vacation) mode, or set to internet, which limits Touch Screen operation.
What to do if ALC system has locked up?
If the ALC system has locked up, turn off the monitor and restart it. If the power button is unresponsive, use a pin to press the reset button located on the side of the monitor.
Why is the ALC Touchscreen camera signal weak?
If the ALC Touchscreen camera’s signal status icon shows no bars, ensure the camera is plugged in and the red LED is on. Also, make sure the camera is paired to the correct channel and try re-pairing it to the monitor. Move the camera closer to the monitor or adjust the antenna of the monitor or camera for better reception.
How to improve poor picture quality on ALC Touchscreen?
To improve poor picture quality on the ALC Touchscreen, move the camera closer to the monitor or adjust the antenna of the monitor or camera for better reception. Additionally, clean the camera lens using a microfiber cloth.
How to fix ALC Touchscreen not receiving Email Alerts?
To fix the ALC Touchscreen not receiving Email Alerts, set the Port to 465 and the smtp to smtp.gmail.com.
What to do if ALC Touchscreen live screen has no icons?
If the ALC Touchscreen live screen has no icons, the screen lock may be activated. To resolve this, tap the power button to unlock the screen.
What to do if ALC Touchscreen standard or scheduled recording is not working properly?
If standard or scheduled recording is not working properly on your ALC Touchscreen, ensure the SD card is inserted into the monitor and formatted. Also, there might be no movement detected to trigger the motion sensor.
How to fix ALC Touchscreen unable to pair the camera to the monitor?
To resolve the issue of being unable to pair the camera to the ALC Touchscreen monitor, ensure the camera’s power is on. Press and release the pairing button quickly. If problems persist, turn off the monitor and restart. If the power button does not respond, use a pin to press the reset button located on the side of the monitor.
Why is my ALC Touchscreen showing a white image at night?
If a white image appears at night on your ALC Touchscreen, it's likely due to the camera’s infra-red LEDs reflecting off surfaces like glass. To improve night vision, place the camera on the other side of the window or in a well-lit area, such as by installing a security lamp.
General| Brand | ALC |
|---|---|
| Model | Observer AWS3266 |
| Category | Touchscreen |
| Language | English |
To Next Page
