4
Du
ring a conversation
Sending DT
MF signals
During a conversation you sometimes have to send DTMF signals, such as with a voice
server, an automated attendant or a remotely consulted answering machine. The function
is automatically cancelled when you hang up.
C
alling a second person during a conversation
During a conversation, to call a second person.
Tr
ansferring a call
During a conversation, to transfer the call to another number:
T
hree-way conference
During a conversation, a second call is on hold.
Dive
rt your calls to another number
Dive
rt your calls to another number / Your mailbox
W
hen you return, cancel all diversions
during a
conversation
to activate
the first call is on
hold
dial directly the
number for
your call
dial
number to be
called
three-way
conference
cancel conference and return to
first correspondent
hang up on all
correspondent
follow informations
displayed on the screen
press the key associated with the type
of diversion required (immediate, if
busy, if no reply etc.)
if necessary, confirm
cancellation of the
diversion
press the key next to "cancel or
deactivate the diversion"
Paul
in conversation
¤MFcode
OR
Send DTMF
2
6
5
3
ab c
def
jkl
mn
Transfer
¤Conference
V
oice message service
Cons
ulting your voice mailbox
If the key flashes, a new voice message or a new text message has been received.
D
irectory
Using
call by name
Pro
gram your call keys
Mak
e calls via your programmed call keys
Customize your terminal
The customization functions of the telephone are accessed from the Menu page.
Modif
ying your personal code
follow informations
displayed on the screen
press the key next to "consult voice or
text message"
enter the first
letters of the name
select the name from the
displayed list
make the call
select the name from the displayed list
follow informations
displayed on the screen
press a call key (not programmed) or a
programmable key (f1 or f2)
find the correspondent
you want to call from the
programmed call keys
call the chosen
correspondent
reach the "menu"
page
follow informations
displayed on the screen
OR
PERSO
10:30
…
OR
Helen
menu
10:30
Settings
Options
OR
Phone
Password
Lock
/ unlock your telephone
A
djusting the audio functions
Adjusti
ng screen brightness Alcatel-Lucent IP Touch
4038 Phone / 4039 Digital Phone
G
uarantee and clauses
This document describes the services offered by the Alcatel-Lucent IP Touch 4038 Phone, 4039 Digital
Phone and IP Touch 4068 Phone sets (that can be equipped with a Bluetooth® handset) connected to an
Alcatel-Lucent OmniPCX Office or Alcatel-Lucent OmniPCX Enterprise Communication Server system.
For more information, see the user manual for your Alcatel-Lucent IP Touch 4038/4068 Phone (IP set)
or 4039 Digital Phone (digital set) set. Contact your installer.
Warning: never place your telephone in contact with water. To clean your telephone, you may however
use a damp soft cloth. Never use solvents (trichlorethylene, acetone, etc.) which may damage the plastic
parts of your telephone. Never spray it with cleaning products.
The ear piece and microphone area of the handset may attract metallic objects that may be dangerous
for the ear.
The wording is not contractual and may be subject to change. Some functions of your telephone are
controlled by a software key and the configuration of the unit.
EC countries: we, Alcatel-Lucent Enterprise, declare that the Alcatel-Lucent IP Touch 4038 Phone,
4039 Digital Phone and IP Touch 4068 Phone products (that can be equipped with a Bluetooth® handset)
comply with the essential demands of Directive 1999/5/CE of the European Parliament and Council.
A copy of the original of this declaration of compliance can be obtained from your installer.
Alcatel-Lucent IP Touch 4068 Phone & IP Touch Bluetooth® wireless handset.
This device uses a radio frequency spectrum the use of which has not been harmonized in all EC
countries. The frequency spectrum may be shared by other applications and its use is subject to the
following two conditions:
(1) this device may not cause harmful interference, (2) this device must accept any interference received,
including interference that may cause undesired operation. This device complies with Class B of part 15
of the FCC (Federal Communications Commission) rules or with the CISPR 22 standard. This device has
been designed and manufactured so that it does not exceed the limits in radio frequency energy in SAR
(Specific Absorption Rate) established by the different countries concerned. The SAR (Head) value
measured is less than 0.0025 Wkg (the maximum globally accepted limit is 1.6 Wkg).
Collection of these products at the end of their product life must be done selectively.
Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-
Lucent. All other trademarks are the property of their respective owners.The information
presented is subject to change without notice.
Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.
Copyright © 2007 Alcatel-Lucent. All rights reserved.
reach the "menu"
page
depending the displayed
informations, enter your
password or confirm
reach the "menu"
page
adjust ringing (melody, volume, mode,...) by
following instructions displayed on the
screen
reach the "menu"
page
increase or decrease the contrast
menu
10:30
Lock
2
6
5
3
ab c
def
jkl
mn
To Previous Page
Loading...
