Alcatel-Lucent 7302 - Create an xDSL IPoA user and add this user to a VLAN on the LT for C-VLAN cross-connect; Configure SHDSL; Configure IMA on SHDSL spans; Configure global VLAN parameters on the LT

Contents
Alcatel-Lucent 7302 | 7330 | 7356 R4.3.02 December 2011 xi
3HH-10104-AAAA-TQZZA Edition 02 Released Operations and Maintenance Using CLI for FD 24 NT
DLP 1174 — Create an xDSL IPoA user and add this user
to a VLAN on the LT for C-VLAN
cross-connect DLP 1174-1
DLP 1182 — Configure SHDSL DLP 1182-1
DLP 1183 — Configure IMA on SHDSL spans DLP 1183-1
DLP 1187 — Configure global VLAN parameters on the
LT DLP 1187-1
DLP 1188 — Configure custom PSD points DLP 1188-1
DLP 1189 — Configure VDSL2 virtual noise values DLP 1189-1
DLP 1190 — Configure threshold crossing alerts DLP 1190-1
DLP 1197 — View port configuration and operational
data on LT DLP 1197-1
DLP 1201 — Configure protocol tracing DLP 1201-1
DLP 1202 — Configure QoS threshold crossing alerts DLP 1202-1
DLP 1203 — Configure general security settings DLP 1203-1
DLP 1205 — Configure Link Related Ethernet OAM DLP 1205-1
DLP 1206 — Configure an xDSL DPBO profile DLP 1206-1
DLP 1207 — Modify an xDSL DPBO profile DLP 1207-1
DLP 1208 — Configure xDSL power back off DLP 1208-1
DLP 1212 — Create an IP user/subnet DLP 1212-1