Alcatel-Lucent 7302 - Configure vMAC; View the status of various system parameters; Configure SFP uplink ports; Enable OAM counters

Contents
Alcatel-Lucent 7302 | 7330 | 7356 R4.3.02 December 2011 xvii
3HH-10104-AAAA-TQZZA Edition 02 Released Operations and Maintenance Using CLI for FD 24 NT
DLP 2209 — Configure vMAC DLP 2209-1
DLP 2210 — View the status of various system
parameters DLP 2210-1
DLP 2211 — Configure SFP uplink ports DLP 2211-1
DLP 2213 — Enable OAM counters DLP 2213-1
DLP 2214 — Configure connectivity fault management DLP 2214-1
DLP 2216 — Configure Voice MEGACO DLP 2216-1
DLP 2222 — Create the PCCP group DLP 2222-1
DLP 2223 — Configure SHub port mirroring DLP 2223-1
DLP 2224 — Change shelf mode DLP 2224-1
DLP 2230 — Configure a VLAN on the SHub DLP 2230-1
DLP 2231 — Manage the ports on the NT DLP 2231-1
DLP 2236 — Configure the enhanced system clock
synchronization DLP 2236-1
DLP 2273 — External Packet Forwarding DLP 2273-1
Routine Task Procedure (RTP)
RTP 1102 — Retrieve remote inventory RTP 1102-1
RTP 1103 — Retrieve board temperature RTP 1103-1