Contents
xii December 2011 Alcatel-Lucent 7302 | 7330 | 7356 R4.3.02
Operations and Maintenance Using CLI for FD 24 NT Edition 02 Released 3HH-10104-AAAA-TQZZA
DLP 1215 — Configure the impulse noise sensor on an
xDSL line DLP 1215-1
DLP 1217 — Configure the xDSL overrule data DLP 1217-1
DLP 1219 — Forced NT switchover DLP 1219-1
DLP 1220 — Manage the CDE profile DLP 1220-1
DLP 1221 — Manage troubleshooting counters on LT DLP 1221-1
DLP 1225 — Configure the p-bit counter on a VLAN
port DLP 1225-1
DLP 1232 — Create an xDSL IPoA user and add this user
to a VLAN on the LT for iBridge DLP 1232-1
DLP 1253 — Configure the third-party equipment
management port on the 7356 FD REM DLP 1253-1
DLP 1255 — Configure a port on the NELT-B LT DLP 1255-1
DLP 1257 — Configure a line with an xDSL RTX profile DLP 1257-1
DLP 1258 — Modify an xDSL RTX profile DLP 1258-1
DLP 1270 — Configure spanning tree on the NELT-B LT DLP 1270-1
DLP 1271 — Configure link aggregation on the NELT-B
LT DLP 1271-1
DLP 1282 — Configure the fairness SLA on the NELT-B
LT DLP 1282-1
To Next Page
Loading...
