Alcatel-Lucent 7330 - DLP 2114 - Configure NT redundancy; DLP 2115 - Create a L2-terminated forwarder VLAN; DLP 2116 - Create a L2-terminated router VLAN; DLP 2121 - Add a network;LAG port to a VLAN in the SHub

Contents
xiv December 2011 Alcatel-Lucent 7302 | 7330 | 7356 R4.3.02
Operations and Maintenance Using CLI for FD 24 NT Edition 02 Released 3HH-10104-AAAA-TQZZA
DLP 2111 — Plan, replan, and unplan equipment DLP 2111-1
DLP 2114 — Configure NT redundancy DLP 2114-1
DLP 2115 — Create a L2-terminated forwarder VLAN DLP 2115-1
DLP 2116 — Create a L2-terminated router VLAN DLP 2116-1
DLP 2121 — Add a network/LAG port to a VLAN in the
SHub DLP 2121-1
DLP 2122 — Create a forwarding VRF DLP 2122-1
DLP 2123 — Create a router VRF DLP 2123-1
DLP 2125 — Create an IPoA user DLP 2125-1
DLP 2126 — Create an IPoE user DLP 2126-1
DLP 2128 — Add an LT port to a VLAN on the SHub DLP 2128-1
DLP 2132 — Configure filtering on the NT DLP 2132-1
DLP 2136 — Configure the multicast service in the
system DLP 2136-1
DLP 2137 — Configure a multicast VLAN DLP 2137-1
DLP 2138 — Configure a multicast channel DLP 2138-1
DLP 2139 — Configure DHCP relay agent in iBridge
mode DLP 2139-1
DLP 2140 — Configure DHCP relay agent in router
mode DLP 2140-1