Alcatel-Lucent 735x ISAM FTTB Product Portfolio8
More about the 735x FTTB family members
Up to 100 Mb/s – 24p VDSL2, 30a and 17a profiles
Flexible FTTB/FTTH mix – Serve FTTB/FTTH subscribers
from the same fiber, line card or shelf
Smallest box on the market – 19” form factor, 1RU
Indoor/outdoor – EMC and industrial temperature
hardened (-40ºC to +65ºC)
Virtual ONT – Same QoS management for FTTB
as for FTTH subscribers
Up to 100 Mb/s – 24p VDSL2, 30a/17a/12b/12a, back-
wards ADSL/ADSL2+ compatible
Low barrier for VDSL2 rollout – Plug ‘n’ Play Ethernet-
fed VDSL2 remote
Carrier-grade pizza box – ISAM management and
service intelligence
Indoor/outdoor – EMC and industrial temperature
hardened (-40ºC to +65ºC)
Smart DSL – Stabilize DSL lines at up to 30 percent higher
rate than traditional way
The Alcatel-Lucent 7352 ISAM FTTB ONT is ideal for
service providers pursuing an FTTB strategy or a combi-
nation of FTTH and FTTB. Typically such service provid-
ers are deploying FTTH to single-dwelling units, but for
economical and time-to-market reasons they want to re-use
existing in-building copper in multi-dwelling units. With
the Alcatel-Lucent 7352 FTTB ONT’s Virtual ONT con-
cept, the QoS for FTTB subscribers can be managed in
the same way as for FTTH fiber-connected users. This FTTB
model completely complies with the FSAN GPON standards.
The Alcatel-Lucent 7354 ISAM FTTB RU is designed
for service providers involved in gradual fiber migration.
Instead of deploying fiber to the home, many service provid-
ers are choosing to re-use the existing copper pairs where
available, and to deploy VDSL2 service from the cabinet
or FTTB deployments. In this respect, the Alcatel-Lucent
7354 ISAM FTTB RU is ideal for both Tier 1 and smaller
operators. It provides a compact Ethernet-fed ISAM DSLAM
for FTTB or cabinet deployments, and is an ideal comple-
ment to existing (CO) ISAM deployments, offering the
same management and service intelligence as other members
of the ISAM family. For smaller operators, the Alcatel-
Lucent 7354 ISAM FTTB RU provides the lowest barrier
to high-speed VDSL2 deployments with 30a profile support
and standard Ethernet uplink, while still offering Alcatel-
Lucent’s expertise in carrier-grade DSL products.
To Next Page
Loading...
