7.6.4 Set the delay before the brightness is dimmed when the phone is not in use
(screensaver)
• or (long press) Display Screensaver
• set the time delay (default 4 hours).
•
•
7.7 Adjusting the contrast of the display (8028s, 8018)
• Reach the 'Menu' page.
• Settings Phone Contrast
• Decrease or increase the contrast of the display.
•
•
7.8 Selecting the welcome page
This function is used to choose the page displayed by default on the telephone.
• Settings Phone Homepage
• Select the default page (Menu, Perso, Info, Last page seen…).
•
•
7.9 Selecting language
• Reach the 'Menu' page.
• Settings Phone Language
• Select the language of your choice.
•
•
7.10 Programming keys for call numbers and functions (Perso page/F1 and F2
keys/add-on keys)
123<>abc: If your set is not provided with a magnetic keyboard, use the alpha-numeric keyboard to
enter letters. Use the alpha-numeric keyboard key to switch between the numeric and alphabetic
keyboard. When in alphabetic mode, the LED corresponding to the key remains lit up.
Depending on your deskphone, you can program:
• Softkeys of the Perso page.
• Keys/softkeys of the add-on module.
• F1 and F2 keys.
• Programmable keys with LED and paper.
• Programmable keys with LED and paper.
Led behavior may differ depending on the system configuration. For more information, contact
your installer or administrator.
To Next Page
Loading...
