11.2.6 Use your device
Use the 8115/8125 Audioffice as a conference module.
Placing or receiving an Alcatel-Lucent Deskphone call in jack mode
Upon jack connection to the Alcatel-Lucent Deskphone, user needs to configure the jack interface to
'External Handsfree' in order to use it for conference.
The jack connected, dial from your Alcatel-Lucent Deskphone and press the Alcatel-Lucent 8125
Audioffice volume button to use it as a conference device.
To end the call, hang up the call from the phone.
Muting a call can be done with the Audioffice Mute button or through the Alcatel-Lucent Deskphone Mute
key.
Placing or receiving an Alcatel-Lucent Deskphone call in Bluetooth mode (8125 Audioffice)
Add the Alcatel-Lucent 8125 Audioffice in the Alcatel-Lucent Deskphone Bluetooth device list with
entering 0000 as a pin code.
Dial from your Alcatel-Lucent Deskphone and press the Alcatel-Lucent 8125 Audioffice volume button to
use it as a conference device.
To end the call, you can press the volume button again or hang up the call from the phone.
Muting a call can be done with the Audioffice Mute button or through the Alcatel-Lucent Deskphone Mute
key.
Adjusting the volume
Turn the volume button to regulate the volume coming from the speakers.
Activating and disactivating the mute
Tap the Mute icon from your Alcatel-Lucent deskphone or directly from the Alcatel-Lucent 8125
Audioffice icon.
Activating and disactivating the speakers
To accept a call in speaker mode or to switch to speaker mode during a call, press the volume button on
the base.
11.2.7 Use the 8125 Audioffice with your mobile
You can connect your mobile to the conference module by using the Lightening, 30 pin and micro-USB
adapters. A Bluetooth® connection is needed to place and receive your mobile calls on the Alcatel-
Lucent 8125 Audioffice. To receive and end a voip call, use your Alcatel Lucent softphone application.
To Next Page
Loading...
