The default code on your telephone is 1515.
Create your directory using the 10 keys (0 to 9) on the keypad.
code for function 0 to 9 Internal or outside
“Switch to programming“ number to be entered
code for function old code new code
“Switch to programming“ (4 digits) (4 digits)
CUSTOMISING YOUR TELEPHONE
code for personal to lock to unlock
function
code (4 digits).
“Locking/ Default
Unlocking” code 1515
code for present consecutive consecutive
function
tune
presses to presses
“Switch to obtain tune (8) to adjust
programming”
volume (7)
SETTING UP
You hear a beep. To switch between two
calls, alternately.
You are in conversation. For three-way conference.
■
To another terminal
■
To recorded message (option)
code for function “Voice message“
follow voice instructionsLight flashes
originator of request is
called back
Light flashes
programme another type of
diversion
divert destination function code for number of
number type of diversion required
message service
WHILE YOU ARE AWAY - WHEN YOU RETURN
Number to conference same key
be called to cancel
code for function code for function
“Consultation of call on hold” “Broker call”
HANDLING SEVERAL CALLS
Transferring a call Conference
Receiving a second call Broker call
Diverting calls
Cancelling diversions
Replying to callback request
Consulting recorded messages (option)
Selecting ringer tune and adjusting volume
Programming your personal code
Locking/unlocking your telephone
Programming your personal directory
Personal directory numbers
0
1
2
3
4
5
6
7
8
9
QUICK GUIDE
telephone
or
To Next Page
Need help?
General