EN
Alcatel IP Touch 4038 / 4068
www.alcatel.com
Telephone
Handset
Socket for connecting headphones or a
Hands-free / Loudspeaker unit
Audio keys
Hang-up key:
to terminate a call.
Hands-free/Loudspeaker Key:
to make or answer a call without lifting the
receiver.
• lit in hands-free mode or headset mode (short press),
• flashing in loudspeaker mode (long press).
Intercom/Mute key:
• During a conversation: press this key so that your
correspondent can no longer hear you.
• Terminal idle: press this key to answer calls automatically
without picking up the receiver.
To adjust the loudspeaker or handset volume up or down
.
Extension unit
An extension unit can be fitted to your
telephone. This provides additional keys
which can be configured as function keys,
line keys, call keys, etc.
To affix labels:
push the holding strip of
the unit backwards to you and lift it. Install
the label under the keypad, in the housing
designed for, and place the keypad back into
position.
Alphabetic keypad
Display and display keys
Contains several lines and pages providing information on calls and the functions accessible via the 10
keys associated with the words on the screen.
Diversion icon:
pressing the key next to this icon allows you to program or change the
diversion function.
Headset connected. Appointment programmed.
Silent mode activated. Telephone locked.
Display keys:
pressing a display key activates the function shown associated with it on
the screen.
Navigation
Welcome screens
OK key:
used to validate your choices and options while programming or
configuring.
Left-right navigator:
used to move from one page to another.
Up-down navigator:
used to scroll through the content of a page.
Back/Exit key:
to return to previous menu (short press) or return to first screen
(long press) ; during a conversation, provides access to welcome scr
eens (Menu,
Info, ...) and to return to the conversation icon screens.
Menu page:
contains all functions and applications ac-
cessible via the keys associated with the words on the
screen.
Perso page:
contains call line keys and programmable
call keys.
Info page:
contains information on the telephone and the status of its functions: name, telephone
numb
er, number of messages, activation of diversion function, appoi
ntment reminder, etc.
Call display
Incoming call. Call in progress or outgoing call.
Call on hold.
If you get two calls at the same time, you can
switch from one call to the other by pressing the
display key associated with each call.
Left-right navigator:
used to check calls.
OK key:
used to answer the call checked.
Function keys and programmable keys
Guide key:
used to obtain informations on functions of the "menu" page and to program
key of the "perso" page.
Messaging key to access various mail services
If the key flashes, a new voice message or a new text message has been received.
"Redial" key :
call back the last number dialled.
Programmable key (F1 and F2 keys)
Lit when the function associated with the key is activated.
Adjust the tilt of the screen
NOE-DC
Indicator light
• flashing green: incoming call
• flashing red: alarm
3GV19001BSAAed01.fm Page 2 Jeudi, 10. juin 2004 4:40 16
To Next Page
Need help?
General
