Alcatel LINKZONE MW41MP - SMS Management; Network and Device Settings; Network Selection and WAN Mode; APN Configuration

11 12
• If there is no client connected to the Hotspot within two minutes, WPS will be deactivated.
Network Settings
• Network Selection
• To change the current settings, disconnect from the network first.
• Automatic: The device will search for available networks automatically. 2G only, LTE Off, LTE On modes in
draw down list.
• Manual: Search for an available network manually.
• WAN Connection Mode Settings
• To change the current settings, disconnect from the network first.
• Automatic: The device will automatically connect to the network when it is powered on.
• Manual: Connect to the network manually.
• APN
• You can set the Access Point Name (APN) on this page.
• Profile: You can add one or more profile names. Click Add New to add one profile name.
• PDP Type: IPv4/IPv6/IPv4&IPv6.
• Profile Name: This is where you assign a name to a new profile.
• APN: Access Point Name. The APN can contain 0-9 a-z A-Z . - but it can’t start or end with . or -.
• Authentication: It is provided by your Internet Service Provider (ISP). Password Authentication Protocol
(PAP) provides a simple method without encryption for the peer to establish its identity using a 2-way hand-
shake. Challenge-Handshake Authentication Protocol (CHAP) is used to periodically verify the identify of
the peer using a 3-way handshake.
• User Name: Use name is used to obtain authentication from the ISP when the connection is established.
• Password: Password is used to obtain authentication from the ISP when the connection is established.
• Click “Set as default“ to set this profile as the default profile.
Device Settings
• Account Management
• You can change your login password on this page.
• The password can’t be empty and must contain no more than 32 characters.
• The password can contain 0-9 a-z A-Z ! # $ * + , - . % : = ? @ [ ] ^ _ { | } ~
• PIN Management
• To change the current settings, disconnect from the network first.
• You can change the PIN status and the PIN code on this page.
• The SIM card will be locked if you’ve entered an incorrect PIN 3 times, and you will have to enter the PIN
unlock code to unlock it.
• The PIN code and the PIN unlock code may be offered together with a SIM card. If not, contact your opera-
tor. Change the default PIN code as soon as possible.
• Reset Factory Settings: Click Reset to reset all settings to defaults, and the device will restart automatically.