Alcatel LINKZONE - SAR Value and Compliance

13
part of comprehensive guidelines and establish permied
levels of RF energy for the general populaon. The
guidelines are based on standards that were developed by
independent scienc organizaons through periodic and
thorough evaluaon of scienc studies. These guidelines
include a substanal safety margin designed to ensure the
safety of all persons, regardless of age and health.
The exposure standard for routers employs a unit of
measurement known as the Specic Absorpon Rate,
or SAR. The SAR limit set by public authories such as
the Federal Communicaons Commission of the US
Government (FCC), or by Industry Canada, is 1.6 W/kg
averaged over 1 gram of body ssue. Tests for SAR are
conducted using standard operang posions with the
router transming at its highest cered power level in all
tested frequency bands.
Although the SAR is determined at the highest cered
power level, the actual SAR level of the router while
operang can be well below the maximum value. This is
because the router is designed to operate at mulple power
levels so as to use only the power required to reach the
network. In general, the closer you are to a wireless base
staon antenna, the lower the power output of the router.
Before a router model is available for sale to the public,
compliance with naonal regulaons and standards must
be shown.
The highest SAR value for this model phone when tested is
1.26 W/Kg for use close to the body.
For body-worn operaon, the phone meets FCC RF
exposure guidelines provided that it is used with a non-
metallic accessory with the handset at least 10 mm from
the body.