EasyManua.ls Logo

Alcor EGT User Manual

Default Icon
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Take a Flight
to Our Web Site
Web site: www.alcorinc.com
E-Mail: support@alcorinc.com
PN 59180
REV. G, 01/08
FAA-PMA/STC SA 522
SW: This product is FAA
approved for installation
on ALL piston engine
aircraft. After installation
of complete system,
return aircraft to service
via Form 337 referenc-
ing STC SA 522 SW.
This is not required for
replacement parts. All
piston powered aircraft,
regardless of make, are
covered by this STC.
– 4
EGT Probe
Installation Instructions
FAA/PMA Approved
WARRANTY INFORMATION
www.alcorinc.com
Alcor
©
, Inc. warrants all parts in all new Alcor
©
, Inc. products to be
free from defects in material and workmanship under normal use and under
the following conditions: Alcor
©
, Inc.’s obligation under this warranty is limited
to the repair or exchange of any defective part, if the part is returned and return
shipping prepaid, within FIVE YEARS of the date of manufacture for grounded
thermocouples and within ONE YEAR of the date of manufacture for
ungrounded thermocouples.
Alcor
©
, Inc. is not responsible for any service charges, including removal and
reinstallation costs, or any other consequential damages. This warranty is
void as to any product damaged as a result of misuse, accident, negligence,
unauthorized repairs or handling in transit. If the Alcor
©
, Inc. product's serial
number or inspection date label has been altered, the warranty is void.
Questions concerning all Alcor
©
, Inc.’s products should be directed
to Customer Support at 1-800-FLI-SAFE (1-800-354-7233) or email:
support@alcorinc.com.
Question and Answer IconNeed help?

Do you have a question about the Alcor EGT and is the answer not in the manual?

Alcor EGT Specifications

General IconGeneral
TypeExhaust Gas Temperature Gauge
Accuracy±1% FS
Resolution1°C or 1°F
Probe TypeType K Thermocouple
DisplayDigital
Power Supply12V DC

Summary

WARRANTY INFORMATION

EGT Probe Installation Instructions

GENERAL INFORMATION

Essential details on thermocouple replacement and new installation considerations for Alcor probes.

INSTALLATION, CLAMP TYPE

Step-by-step guide for installing clamp-type EGT probes, including drilling and securing procedures.

INSTALLATION, SCREW-IN TYPE

Step-by-step guide for installing screw-in type EGT probes, including weld boss and securing procedures.

FREQUENTLY ASKED QUESTIONS

Addresses common issues and queries regarding Alcor probe installation and troubleshooting.

Related product manuals