Need help?Do you have a question about the Alde Comfort 2928 and is the answer not in the manual?
Details on how to mount the boiler securely within a cupboard, ensuring proper ventilation and clearances.
Instructions for installing the chimney hood, pipe, and sleeve coupling for exhaust and air intake.
Guidance on connecting the boiler to an LPG cylinder, including regulator and copper pipe installation.
Instructions for positioning and installing the room thermostat for optimal heating control.
Details on the 12-volt electrical connection to the boiler using the terminal block and spade connectors.
Details on connecting the LPG boiler with water heater and immersion heater to the heating system.
Instructions for filling the heating system with a 60% water, 40% glycol mixture and bleeding the system.
Checks for the LP gas system, including leak testing, pressure reduction valve, and usage of a leakage tester.
Procedures for testing the heating system for leaks, checking hose clips, and ensuring correct connections.
Verification of drainage tubes, circulation pump direction, chimney attachment, and ventilation drum airflow.
Details on how to mount the boiler securely within a cupboard, ensuring proper ventilation and clearances.
Instructions for installing the chimney hood, pipe, and sleeve coupling for exhaust and air intake.
Guidance on connecting the boiler to an LPG cylinder, including regulator and copper pipe installation.
Instructions for positioning and installing the room thermostat for optimal heating control.
Details on the 12-volt electrical connection to the boiler using the terminal block and spade connectors.
Details on connecting the LPG boiler with water heater and immersion heater to the heating system.
Instructions for filling the heating system with a 60% water, 40% glycol mixture and bleeding the system.
Checks for the LP gas system, including leak testing, pressure reduction valve, and usage of a leakage tester.
Procedures for testing the heating system for leaks, checking hose clips, and ensuring correct connections.
Verification of drainage tubes, circulation pump direction, chimney attachment, and ventilation drum airflow.
General| Voltage | 12 V DC / 230 V AC |
|---|---|
| Glycol mixture | 50% |
| Power consumption 12 V DC | 0.2 A |
| Fuel | LPG/Propane, Butane |
| Fuel Type | Diesel |
To Next Page
