ALDER TAPWARE Vito Bertoni Series User Manual

For all servicing needs, please contact CUSTOMER SERVICE on:
FREECALL: 1800 800 919 PHONE: 08 93094688 FAX: 08 9409 6589 EMAIL: customer.service@aldertapware.com.au
www.aldertapware.com.au www.vitobertoni.com.au
V02 140210
alder tapware
PRODUCT: SHOWER / BATH DIVERTER
WARRANTY
1. Alder products - taps, mixers, showers and accessories
 1 year parts and labour warranty
 5 year replacement warranty on ceramic disc cartridges
2. Warranty claims must be accompanied by the invoice showing dates of purchase or installation. Where a product
has not been installed, the product can be returned with proof of purchase, to the place of purchase.
3. This warranty may become void due to the following:-
 Inability to provide proof of purchase
 Products not installed by a licensed plumber
 Products not installed in accordance with installation instructions
 Products exposed to pressures that exceed 500 Kpa and or temperatures that exceed 75
o
C within a building
– Refer AS/NZS 3500.1:2003 (Clause 3.34)
 Damage to ceramic disc cartridges from foreign matter e.g. sand, dirt, stones, thread tape, pieces of copper
or plastic tubing etc.
 Inadequate flushing of system prior to usage, causing damage and/or obstructions to the product
 Damage to product surface due to installation (including adhesives and sealants)
or post-installation
 Failure to install flow regulators and check valves from outlets including showers,
sink and vegie mixers
 Products not used for its intended purpose
 Products fitted with other devices to the outlet e.g. water filters
 Failure to observe care and cleaning instructions, including failure to
regularly clean aerator inserts in taps and or shower heads

ALDER TAPWARE Vito Bertoni Series Specifications

General

Brand	ALDER TAPWARE
Model	Vito Bertoni Series
Category	Plumbing Product
Language	English

Summary

Alder Tapware Warranty Information

Product Warranty Coverage

1 year parts/labour and 5 year ceramic disc cartridge replacement warranty.

Warranty Claim Process

Requires proof of purchase and installation by a licensed plumber for valid claims.

Warranty Void Conditions

Voided by missing proof of purchase, improper installation, or product misuse/exposure.

Shower Bath Diverter Installation Guide

Initial Installation Steps

Flush system, secure diverter body, align connections correctly, and avoid direct brazing.

Mixer and Cover Plate Fitting

Install mixer vertically, check connections, fit handle, and secure cover plate after tiling.

Post-Tiling Installation Actions

Remove protective covers, apply sealant to wall plate, fit plate, and test diverter operation.

Important Operational Notes

Check aerator filters, use pressure limiting devices if needed, and ensure equal inlet pressures.