blades contacting a “live“ wire may make exposed metal parts
of the power tool “live“ and could give the operator an electric
shock.
−Check the hedge for foreign objects before operation, e.g. wire
fences.
−Keep hands and feet away from the cutting devices at all times
and especially when switching the product on.
−Do not try to grasp or remove trimmings when the product is
running. Only remove trimmings when the product is switched
off.
−Check the work area for foreign objects before operation, e.g.
wire fences. Take care that the cutting device does not come
into contact with wire or other metal objects.
−Never hold the product by the guard.
−Always be sure of a safe and secure operating position, whilst
using the product. Always be sure of your footing when using
steps and when using your product. Never use the product
standing on steps or a ladder. Do not work above shoulder
height.
−Store power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions
to operate the power tool. Power tools are dangerous in the
hands of untrained users.
−Maintain power tools. Check for misalignment or binding of
moving parts, breakage of parts and any other condition that
may affect the power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents are caused by
To Next Page
Loading...
