poorly maintained power tools.
−Always ensure the safety guard supplied is fitted before using
the product. Never attempt to use an incomplete product or
one fitted with an unauthorised modification.
−Check the cutting device regularly for damage, and if damaged
do not use the appliance, but contact the After Sales Support
line.
−Do not overload the product.
−Check immediately if the product starts to vibrate abnormally.
Excessive vibration can cause injury.
−Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to bind and
are easier to control.
−Use the power tool and accessories in accordance with these
instructions, taking into account the working conditions and
the work to be performed. Use of the power tool for operations
different from those intended could result in a hazardous
situation.
−Keep the handle dry, clean and free from oil and grease.
Slippery handles do not allow for safe handling and control of
the tool in unexpected situations.
−Use the product only in daylight or good artificial light.
−Never operate the product with damaged guards or shields or
without guards or shields in place.
−Before use check the controls and correct operation of the
product.
−Before using the product or after any impact, check for signs of
To Next Page
Loading...
