wear or damage and repair as necessary.
−Always disconnect the product from the power supply (i.e.
remove the plug from the power supply):
~ when leaving the product unattended.
~before clearing a blockage.
~before checking, cleaning or working on the product.
~after striking a foreign object.
~whenever the product starts vibrating abnormally.
−Take care against injury to feet and hands from the cutting
attachment.
−Always ensure that the air vents are kept clear of debris.
−Never use replacement parts or accessories not provided or
recommended by the manufacturer.
−Avoid using the product in bad weather conditions especially
when there is a risk of lightning.
−Position the cord so that it will not be caught by the cutting
attachment during operation.
−Disconnect from the power supply when the cord becomes
damaged or tangled.
−If the cord becomes damaged during use, disconnect the cord
from the supply immediately. DO NOT TOUCH THE CORD BEFORE
DISCONNECTING THE SUPPLY.
−Do not use the product if the cord is damaged or worn. Contact
After Sales Support for advice on repair.
−Warning! The cutting elements continue to move after the
product is switched off.
−Keep the extension cord away from the blades at all times. Only
To Next Page
Loading...
