ALDI Ferrex CQB180D-1 User Manual

- Disconnect the mains plug before each cleaning.
- Disconnect all tools before you clean the compressor.
WARNING!
Risk of burns!
The compressor will become hot during operation.
- Each time before you clean the compressor, let it cool off
completely.
NOTE!
Risk of damage!
Cleaning the compressor with unsuitable cleaners could damage
it.
- Never clean the compressor with water, solvents or similar.
- Do not use any aggressive cleaners, sharp or metallic cleaning
utensils such as knives, hard scrapers and the like. They could
damage the surfaces.
NOTE!
Risk of damage!
Improper or irregular cleaning and maintenance could damage
the compressor.
- Do not in any case open the housing.
- Keep all protective devices, vents and the motor housing as
free of dust and dirt as possible.
- Clean the compressor regularly, ideally directly after you
finishing work.
1. Set the On/Off switch
1 to the “0” position.
2. Disconnect the mains plug before cleaning.
3. Let the compressor cool off completely.
4. Open the drain valve 16 to completely bleed the compressor until no more air is
released.
Cleaning
24

ALDI Ferrex CQB180D-1 Specifications

General

Brand	ALDI
Model	Ferrex CQB180D-1
Category	Air Compressor
Language	English