Using the battery
14
Switching the product on and off
Switching on
− Press and hold the on/off switch
6
.
The LED work light
5
will turn on when the on/off switch is pressed down all the
way gently.
Switching off
− Let go of the on/off switch
6
.
Setting the direction of rotation
You can use the direction switch
2
to set the direction in which the impact driver
rotates.
− Press the switch on the left-hand side:
the impact driver will rotate anticlockwise.
− Press the switch on the right-hand side:
the impact driver will rotate clockwise.
Using the battery
WARNING!
Risk of injury!
Incorrect use of the rechargeable battery and charger can cause injury.
− This product does not come supplied with a battery. Only use the re-
chargeable batteries specified in the chapter ‘Technical data’ for the prod-
uct. Do not operate the product with rechargeable batteries from other
manufacturers.
− Read and follow the instructions in the user manual for the battery and
charger used.
− Remove the battery from the product when the product is not in use or is
being checked, cleaned or stored.
Charging the battery
− To charge the battery, follow the instructions described in the user manual for the
battery pack and charger used.
To Next Page
Loading...