NOTE!
Risk of injury
Remove the scissor blade guard before each use and replace it after use and during
interruptions.
Switch on device
1. Hold the motor unit 1
by the hand grip in your hand.
2. Remove the scissor blade guard
5
/
7
.
Keep all parts away from the cutting blade so that the motor can start safely.
3. Firmly cover the hand grip and at the same time press the switch lock 9 with
your thumb.
4. Now press the on/off switch 12 with your index finger.
The device is switched on!
Switch off device
1. Let the on/off switch 12 go.
The device is switched off!
Cutting
Always operate the blade pointing away from your body, never towards it.
Carefully examine the lawn area before cutting and remove any foreign objects such
as stones, if necessary.
Search hedges and bushes before cutting for concealed objects, such as wire fences,
and remove these if necessary.
Remove thick branches beforehand with pruning shears.
You can achieve the best cutting performance if you use the shrub blade so that the
blade’s teeth are directed towards the hedge at an angle of approx. 15°.
With the double-sided, opposing blade, you can cut in both directions with the shrub
blade.
Inspection
WARNING!
Risk of injury from sharp blades
-
Use protective gloves.
Operation
22
To Next Page
Loading...
Need help?
General
