27
Digital Inverter Generator with Pure Sine Wave
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028
MODEL: №. XG-KF2000 • 03/2020 • 700069
(toll free)
AFTER SALES SUPPORT
(toll free)
e-mail: info.aldi@positecgroup.com1300 889 028
Digital Inverter Generator with Pure Sine Wave
MODEL: №. XG-KF2000 • 03/2020 • 700069
V.
W.
Spark Plug
To ensure the engine is operating correctly, the spark plug must be properly
gapped and free of carbon deposits. Always check the spark plug cable is
rmly tted to the top of the spark plug.
WARNING: Ensure the engine is switched o while undertaking
this task.
1. Pull the spark plug lead (19) o the spark plug (20) and then remove
spark plug (20) from the generator using the supplied spark plug
spanner (28) by rotating in a clockwise direction (Fig. V).
2. Remove carbon deposits using a wire brush.
3. Check for discoloration on the top of the spark plug (20). The standard
colour should be a tan colour.
4. Check the spark plug gap. The acceptable gap should be between 0.6 –
0.8mm (Fig. W).
CAUTION: Check that no foreign material, debris, or dust enters the
crankcase.
Replacement spark plugs are available from purchase from lawn mower or
small engine repair shops.
To Next Page
Loading...