Operation
20
Choosing a lighting duration
1. If necessary, turn the motion sensor housing
3
to reach
the controller for the lighting duration
8
.
2. Choose the desired lighting duration between approx.
5 seconds and approx. 7 minutes by turning the controller
in the corresponding direction:
− Turning the controller clockwise increases the lighting
duration.
− Turning the controller anticlockwise decreases the
lighting duration.
Choosing the sensitivity
You can specify at what brightness (e.g. from dusk) the motion
sensor reacts and switches on the spotlight: Choose between
approx. 2 lux (dark) and 20,000 lux (bright).
1. If necessary, turn the motion sensor housing
3
to access
the sensitivity controller
4
.
2. Choose the desired sensitivity by turning the controller in
the corresponding direction:
• Turning the controller clockwise increases the sensitivity
so that the motion sensor
9
will react even in a bright
environment (e.g. in daylight).
• Turning the controller anticlockwise decreases the
sensitivity so that the motion sensor will only react in
a darker environment (e.g. at night-time).
• Whether the motion sensor reacts depends on the
speed at which the object is moving. The sensor will
not react to movements that are too fast or too slow.
• Electrical sensors are more sensitive in cold, dry
weather conditions than in warm, humid climates.
To Next Page
Loading...
Need help?
General
