EasyManuals Logo

ALDI Lightway BMSL1232 User Manual

ALDI Lightway BMSL1232
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
Switching the spotlight on and off
21
Adjusting the spotlight heads
You can turn both spotlight heads approx. 180°. The maximum
angle of aperture between the two spotlight heads is approx.320°.
You can also move each of the spotlight heads approx. 90°
downwards and approx. 90° upwards.
Adjust the spotlight heads
1
according to your
requirements.
Aligning the solar panel
You can tilt the solar panel downwards by approx. 90°.
Align the solar panel
12
so that optimum charging is ensured
(see chapter “Choosing an installation location”).
Switching the spotlight on and off
Using the power switch you can either turn the spotlight on or off
or operate it in automatic mode. In automatic mode, the spotlight
will switch on if the motion sensor is activated.
To switch the spotlight on, set the power switch
7
to the
ON position.
To switch the spotlight off, set the power switch to the
OFF position.
To activate automatic mode, set the power switch to the
AUTO position.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ALDI Lightway BMSL1232 and is the answer not in the manual?

ALDI Lightway BMSL1232 Specifications

General IconGeneral
BrandALDI
ModelLightway BMSL1232
CategorySpotlight
LanguageEnglish

Related product manuals