Storage
15
− Make sure that no water or other liquids penetrate the
housing.
NOTICE!
Risk of damage!
Improper handling of the laminator may result in damage to the
laminator.
− Do not use any aggressive cleaners, brushes with metal or
nylon bristles, sharp or metallic cleaning utensils such as
knives, metal sponges and the like. They could damage the
surfaces.
− Do not in any case place the laminator in the dishwasher.
It would be destroyed as a result.
1. Disconnect the mains plug before cleaning.
2. Let the laminator cool off completely.
3. Use a damp cloth to wipe off the laminator. Let all parts dry completely
afterwards.
Cleaning the heating rollers
1. Switch the laminator on by moving the ON / OFF switch
3
to “ON” (―).
2. Once the ready indicator
1
turns red, fold a sheet of paper and insert it, folded-
edge first, into the laminating pouch infeed slot
2
.
3. Keep repeating this process until no more glue deposits cling to the paper.
4. Switch the laminator off by moving the ON / OFF switch to “OFF” ( ).
Storage
NOTICE!
Risk of damage!
Improper storage of the laminator may result in damage to the
laminator.
− Never store the laminator next to a heat source.
− Do not fold or kink the mains cord.
To Next Page
Loading...
