45
AFTER SALES SUPPORT
AUS
1300 884 987
www.medion.com.au
MODEL: MD 17329 PRODUCT CODE: 13651 05/2020
Faults
If faults occur, please read the operating instructions to determine whether you have followed all the instructions
correctly.
Please only contact our customer services if none of the solutions provided is successful.
Malfunction Cause Page
Machine does not run smoothly Machine needs to be oiled page 41
Dust and threads in shuttle track page 41 et seqq.
Fabric remains on the teeth of the fabric feeder page 41
Wrong oil was used and has blocked the machine page 39 et seqq.
Upper thread breaks Upper thread not threaded correctly page 16
Thread tension too high page 22
Needle bent or blunt page 24 / page 39
Thread thickness not right for the needle page 46
Needle not inserted correctly page 39
Fabric not pulled through from back at end of seam page 25
Needle plate, bobbin or sewing foot damaged
Lower thread breaks Lower thread tangles because the thread is wound on
to bobbin incorrectly
page 14
Lower thread is not under the tension spring in the
bobbin case
page 15
Needle breaks Needle is inserted incorrectly page 39
Needle is bent page 24 / page 39
Needle is too fine page 46
Fabric pulled while sewing page 24
Knot in the thread page 16
Upper thread is threaded incorrectly page 16
Machine misses stitches Needle is inserted incorrectly page 39
Upper thread is threaded incorrectly page 16
Needle and/or thread not suitable for fabric page 46
Fabric too heavy or hard page 46
Fabric pulled while sewing page 24
Puckering or gathering of seam Upper thread tension too high page 22
Machine threaded incorrectly page 16
Needle too large for the fabric page 46
Thread makes loops Thread tension not adjusted page 22
Upper thread not threaded correctly and/or lower
thread not wound on to bobbin correctly
page 14
Thread thickness not suitable for the fabric page 46
Fabric feed irregular Stitch length is "0" page 26
Thread ends in shuttle track page 41
To Next Page
Loading...
