2. Now push the MIN button
17
until you have reached
the desired target temperature. If you would like to
correct your entry, you can use the SEC button
16
to
reduce the preset time by one minute each.
3. If the target temperature setting is correct, you can exit
the select function by pushing the MODE button
19
.
4. Push the START button
15
to start monitoring the
temperature based on your individual setting. Only
TARGET TEMP
20
and CURRENT TEMP
13
will appear
on the display.
Once the cooking process is complete, the alarm indi-
cator will be triggered again with the display flashing
in red and a beep to indicate the end of the cooking
process.
If you would like to delete the target temperature
setting, push the POWER ON/OFF switch
3
on the
receiver.
To Next Page
Loading...