3. Push the START button
15
(fig. D) to start the timer
function.
The timer indicator on the display will indicate the
remaining time for the temperature measurement
(fig. D).
4. Push the STOP button
18
(see fig. G) to interrupt the
timer function, for example, to check how well cooked
the food is.
5. Push the START button
15
to start the timer function
again.
The timer function will not end when you use the
MODE button
19
to switch back to the display with
the select functions.
Once the set timer function has elapsed, the display
will switch back to indicator mode for reaching the
target temperature.
You can stop the timer function with the STOP button
18
.
Selecting the target temperature
The wireless barbecue thermometer reliably helps you to
achieve convincing cooking results. If you prefer individu-
al cooking results, you can increase or decrease the cook-
ing time by selecting the target temperature manually.
1. On the receiver
1
, use the MODE button
19
(see fig. D) to select the entry of the target tempera-
ture. For this, push the MODE button until the TARGET
TEMP indicator
20
starts to flash on the display.
To Next Page
Loading...