14
AFTER SALES SUPPORT
support@scheppach.com.au
1300 855 831
MODEL: HCE1400 PRODUCT CODE: 58428 11/2018
AUS
Safety regulations HCE1400
m
Caution!
Residual risks
Even if you use this electric power tool in accordance with instructions,
certain residual risks cannot be rules out. The following hazards may arise in
connection with the equipment’s construction and layout:
1. Lung damage if no suitable protective dust mask is used.
2. Damage to hearing if no suitable ear protection is used.
3. Health damage caused by hand-arm vibrations if the equipment is used over a
prolonged period or is not properly guided and maintained.
5. Service
• Have your power tool serviced by a qualied repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
• If the supply cord is damaged, it must be replaced by the manufacturer or its ser-
vice agent in order to avoid a hazard.
Electrical safety:
m Caution: to avoid accidents and injuries from electric shocks:
• The plug and socket of an extension cable must be water-tight!
m Unsuitable extension cables can be dangerous as people can be harmed
by an electric shock!
• Protect the electric plug connections against moisture.
• If there is a risk of ooding, x the plug connections in an area that is safe from
ooding.
• Ensure that the mains voltage matches the specications on the rating plate.
• Connection to the mains must be carried out by an experienced electrician and
meet the requirements of the Australian standards.
• The electrical installation shall be according to national wiring rules.
• The device must only be connected to a mains socket via a residual-current circuit
To Next Page
Loading...
Need help?
General
