To Next PageTo Next PageWhat to do if motor starts but there is no pressure build-up in ALDI WORKZONE HCE2500 Pressure Washer?
If the motor of your ALDI Pressure Washer starts but there's no pressure build-up, the issue might be air entering through the water inlet. Inspect the supply hose and connectors, and replace them if necessary. Also, ensure that the water cock is fully open.
Why is the operating pressure irregular in my ALDI Pressure Washer?
Irregular operating pressure in your ALDI Pressure Washer can be caused by air entering the water inlet. Check the supply hose and hose connectors, and replace them if necessary.
General| Brand | ALDI |
|---|---|
| Model | WORKZONE HCE2500 |
| Category | Pressure Washer |
| Language | English |
Guidelines for maintaining a safe and clear work area during operation.
Key safety precautions related to the electrical supply and connections.
Essential personal safety measures, including alertness and protective equipment.
Best practices for using the power tool correctly and maintaining it.
Guidelines for servicing the power tool and handling damaged supply cords.
Steps to mount the quick connector to the water inlet connection.
Steps to attach the handle and hose holder to the unit.
Steps to attach the cable holder and lance holder.
Ensuring correct electrical connections and extension cable suitability before use.
Initial steps for connecting the gun and preparing for operation.
Guidance on attaching and preparing accessories like foam sprayer and nozzles.
Guidelines for correct operation, including placement, posture, and temperature.
Instructions for connecting the water supply hose to the unit.
Detailed steps on how to use the spray gun, including safety features.
Instructions for using specific accessories like foam sprayer and variable nozzle.
Recommendations for cleaning the high pressure washer after each use.
Information regarding the maintenance requirements of the unit.
