18
AFTER SALES SUPPORT
support@scheppach.com.au
1300 855 831
MODEL: HCE2500 PRODUCT CODE: 64124 03/2019
AUS
Technical data/Assembly HCE2500
The specied vibration value was established in accordance with a standardized
testing method. It may change according to how the electric high pressure washer is
used and may exceed the specied value in exceptional circumstances.
The specied vibration value can be used to compare the high pressure washer with
other electric power tools.
The specied vibration value can be used for initial assessment of a harmful effect.
Keep the noise emissions and vibrations to a minimum:
• Only use appliances which are in perfect working order.
• Service and clean the appliance regularly.
• Adapt your working style to suit the appliance.
• Do not overload the appliance.
• Have the appliance serviced whenever necessary.
• Switch the appliance off when it is not in use.
• Wear protective gloves.
VII. Assembly
m Warning! Ensure the high pressure washer is correctly and completely
assembled before use.
Mounting of the quick connector (Fig.2)
1 Remove the black cap from the back side of the high pressure washer.
2 Mount the quick connector (12) to the water inlet connection (9) at the back side
of the high pressure washer.
Mounting of the handle with holder for high pressure hose (Fig.2)
1 Push the handle with holder for high pressure hose (1) onto the fastening points
at the top of the high pressure washer.
2 Secure the handle with holder for high pressure hose (1) with the screws (19).
Use for this a screwdriver (not included).
Mounting of the holder for mains cable and lance holder (Fig.2)
1 Attach the holder for mains cable (3) and the lance holder (6) onto the both
To Next Page
Loading...
Need help?
General
