- 5 -
KEY-LOCK SETUP:
You may lock the operating buttons to make them no longer useable.
Simultaneously press and hold the “+” and “-“ buttons for at least 5 seconds
to lock the operating buttons; the symbol will appear in the display.
Press and hold the “+” and “-“ buttons again for 5 seconds to unlock the
keys.
display
5
sec.
“+ and -”
display
BACKLIGHT SETUP:
The backlighting will be white during day time and blue during night time.
When the display shows the time ( ), it’s possible to set the intensity of
the backlighting to 7 levels or to turn it off. Press the “+” or “-“ button to
adjust the backlighting.
display
“+ or -”
backlighting
level
TO ENABLE/DISABLE:
The BC-100 may be turned on and off by pressing the button. When
switched off, the BC-100 emits no light and has no display. When enabled
again, the BC-100 will switch on with display and backlighting.
RESET:
You may reset the BC-100 to the default factory settings. Simultaneously
press the , and buttons until CLR appears in the display.
To Next Page
Loading...
General